Pásová pila

Záznam uvidíte za

Standard carpentry machine that is used in many sizes and for practically all crafts. It is not only used for sawing wood, but also for plastics, polystyrene, glass, metal or ceramics. A characteristic feature of all band saws is the welded or soldered saw band running over two deflection rollers. It forms a continuous closed ring and enables endless or uninterrupted cutting.

Basic construction

The construction and principle have remained the same since the 19th century. Differences exist only in manufacturer-specific designs, especially with regard to precision and safety. In the upper and lower area there are two closed hoods which contain and protect the deflection rollers. The tool (band saw blade) is only visible in the cutting area directly above the machine table/workpiece support. The passage height is decisive. Often there is an adjustable stop on this table to guide the workpiece safely. The precision is determined by the guide of the band saw blade in the immediate vicinity of the cutting area.

Special features

If the band saw works with feed rollers on the machine table, it is a resaw. Angular cuts are possible due to a mitre fence on the machine table. A tilting table allows the operator to make diagonal cuts across the workpiece.

Other band saw versions

Obrázky

UH 900H - horizontale Bandsäge
HEMA, ca. 2011
UH 630
HEMA, 2011
Aufbau einer UH 900
HEMA, 2011
Sägeblattführung APA
PANHANS, 2011
SV 3, mobile 3-Rollen-Bandsäge mit Schwenkarm
DARIO, 1995
Klassische Bandsäge: Bäuerle BS 80
BÄUERLE, 1964

Modelové řady (376)

EMCO
SUPA
SIERRA ALAVESAS
SMC
FLOTTJET
SIPA