Tvarovací bruska

Záznam uvidíte za

Profile sanding machines serve the sanding profiled workpiece edges. The workpiece is fed through the machine and in doing so is guided past the sanding aggregates.

Typical workpieces

  • Mouldings (decorative strips, baseboards)
  • Furniture panels with profiled edges
  • Derived timber panels, onto which a solid wood edge has been glued

Basic construction

The construction of profile sanding machines is similar to that of edgebanders. The sanding aggregates and the supports for the upper pressure element are mounted on an elongated base frame. The feeding chain line and the holding fixtures for the extensible workpiece support are mounted on the long side of the base frame. The switch cabinets for the electrics and pneumatics are installed in the base frame. Upper pressure element and sound enclosures complete the machine.

Sanding aggregates

Various types of sanding aggregate are used:

If moulding aggregates are mounted on the machine alongside the sanding aggregates then this is referred to as an edge processing automat.

Similar machine types

  • Machines with the structure described above but only one belt sanding unit for straight edges are accounted as edge banding machines.
  • Machines, which are additionally equipped with milling units for manufacturing of edge profiles are accounted as edge processing

Obrázky

UKP 20
HEESEMANN, 2012
LZK-SD, Radiusschleifen
LANGZAUNER, 2018
LS-2LN
LASM, 2013

Modelové řady (83)