The VKS 250 is a fully-automatic cartboard cutting machine which can be optionally extended by a half-automatic gluing station.

Construction

Machine in portal construction. The unit for transversal processing as well as up to 8 longitudinal units run on two guides. This stretches over the whole width of the portal passage.

The units process in exact measures through a NC-axis. The toothed belt for processing the transversal unit acts a positioning and longituidnal processing unit.

The longitudinal cutting tool in form of a toothed knife slices are components of the rubber roller, which also move the carboard through the machine.

On the infeed two coilers are on the machine via which the endless carton single or double coursed have been added to the cardboard cutting machine.

Function

1st Feed of raw carboards

Endless cartons from the stack which are being manually fed once via the coilers of the machine. It can be fed sinle or double coursed depending on how big the carton cuts turn out.

Optional extension allow the expansion upt o 12-coursed, fully-automatic infeed.

• With the single-coursed feed cuts can take place simultaneously
• With the double-coursed feed thick and thin cartons can be processing in alternation, e.g. from one course the cartons are being cut and from the other course bars for the sub-division within the cartons are being cut.

Single carton blades can be fed (optionally) via the single-blade infeed and a lifting table.

2nd cut

All thinkable, edgy cuts and fold patterns can be executed, even cuts for the creation of supporting grips. The machine can work in the back slicing drive and thus execute more longitudinal cuts and grooves than the longitudinal unit has in command (virtual longitudinal cutting unit).

3rd Cutting pattern

• In the powerTouch control the "carton width", "carton length" and "carton height" are entered which stand for the dimensions of the goods to be packaged. With these measures the machines produces a carton according to the selected pattern.
• Barcode scanner (optional equipment): carton pattern and measure of the packaging goods can be recalled through barcode sanning unit. This makes sense when the same workpieces are to be packaged in the same order over and over again.
• Also entire daily programs/ part lists of the packages to be produced can be created.

5th folds

The folding of carton cuts takes place manually.

6th adhesives

With the help of the half-automatic gluing station (optional equipment) the pre-folded cartons can be glued on one side.

The Hotmelt/ melting glue can be used in cardridge form.

7th carton labelling station

Also optional equipment.

Technical data

• 1-wavey; thickness up to around 4 mm (quality 1.10 to 1.40)
• 2-wavey; thickness up to around 6,5 mm (quality 2.10 to 2.30)