Agregát na předřez

Záznam uvidíte za

In conjunction with the main saw blade this sawing aggregat is used for the hogging or the "scoring" of the sensitive coating of a particle or fibreboard or cutting and therefore pre-scoring the cutting edges of the main saw blade.

Through the use of scoring aggregates (short: scorer) splinterfree cutting edges are achieved also with hard and frangible surface coating, because the cutting force of the main saw blade are not (any longer) directed against the sensitive cutting edges. The scoring saw blade is approximately 0.1 mm up to maximum 0.2 mm wider then the main saw blade. Scoring aggregates work in a clockwise circle (down-cut) and with a higher speed than aggregates of the main saw.

Utilized are divided scoring saw blades (consisting of two parts, which are ajusted through fine thread or with intermediate rings) or conical scoring saws (cutting width is adjustable through the depth of the cut).

Versions

Scoring of the bottom side of a coated panel

  • The scoring aggregate leaves a footprint of 1.5 to 2 mm deep grooth in the workpiece.Precisely in this groove just the main aggregate work and proceed the dividing of the workpiece.
  • This version is found in many panel saws and in all beamsaws.

Scoring of the top of a coated panel

  • Application on vertical panel saws
  • the version with scoring sawblade is similar to the version described above
  • another version uses knives made of carbide that pre-cut the cutting edges of the main saw blade - see HOLZ-HER Super-Cut

Scoring of the vertical edges in the cutting process of panel packs

  • The scoring process is applied to several straight coated panels which lie on top of sheets of panels which lie on top of each other (pack of panels). Many manufacturers offer this aggregat as an option and it finds use where panels which are already coated in the zone of the edges need to be divided.
  • Alternative terms:
  • edge scorer (Schelling)
  • vertikale scoring saw (HOLZMA)

soft- and postforming edges

  • For the scoring of soft - and postforming edges scoring blade appropriate for postformings are used.
  • These are sawing aggregates, which automatically spring up in the edge shown of the workpiece and which divide the workpiece entirely.

Scoring for the parquet production

  • Enabling splinter-free edges of the lamellae before the cleaving saw is used

Scoring in finger jointing technology

  • Unit for scoring before length cutting or for processing the butt joint on galvanizing boundary tines.

Obrázky

Vorschneider an COMPACT Blockbandsäge
RESCH, ca. 2018
2-Achs-Vorritzaggregat
ALTENDORF, 2020
Vorritzer Vergleich: konisch, zweiteilig, Rapido
LEUCO
aufsteigende- und vertikale Vorritzsäge
HOLZMA
vertikales Vorritzaggregat
HOLZMA
Kantenvorritzer
SCHELLING
aufsteigende Vorritzsäge HPP 11
HOLZMA
Vorritz-Zerspaner-Kombi
HOMAG, 2011
Super-Cut
HOLZ-HER, 1997
Vorritzer und Spaltsäge (Modell S4)
SCHROEDER, 2013
LED-Beleuchtung (Schutzvorrichtung im Bereich des Vorritzers)
ALTENDORF, 2018