Seperate Y-axis
Záznam uvidíte za
An edge banding unit with separat y-axis can be found as permanently installed unit on CNC-machining centres. With an extension arm machine there's the main spindle on the side of the cantilever and maybe other units. On the other side of the cantilever there is the edge banding unit with their own, separately controlled Y-axis. Concerning moving table fix gantries it's actually a separate X-axis, but with the same principle. A separate y-axis is the usual form of construction. Other solutions has been brought to the market specifically according to the manufacturer but more like a cheaper alternative for the standard solution. So a variation by Homag is available where the edge banding unit is functioning as changeable unit. By IMA another solution exists which is only used with the BIMA 310/V model. Here the edge banding unit is installed on an own y-axis, but said axis is not powered. If the edge banding unit is needed, it's coupled to the y-axis of the main spindle and proceeds through this one. |
911
640
438
187
183
139
201
326
206
153
126
60
141
19
28
98
168