Pokračováním v používání webových stránek souhlasíte s používáním souborů cookie. Další informace: Ochrana osobních údajů

HOMAG CENTATEQ P-110

Záznam uvidíte za

Compact 5-axis-CNC-machining centre as 3-, 4- or 5-axis machine for the application in smaller artisanry businesses, the n for the application in smaller handicraft businesses.

Technical data (2018)

  • Workpiece length X with single processing: 3 100mm (M) or 4 200mm (L)
  • Workpiecelength X with pendulum processing: 1 025mm (M) or 1 575mm (L)
  • Workpiece length X with single processing and tool diameter 25mm:

3 300mm (M) or 4 400mm (L)

  • Workpiece width with tool diameter 25mm Y: 1 550mm and 1 415 (5-axis)
  • Workpiece width Y: 1 440mm and 1 210 (5-axis)
  • Workpiece thickness: 260mm

Equipment of standard version (2018)

  • Control panel integrated within the CNC
  • Proximity scanner (can halt automatically)
  • Bumper security technology
  • mobile control terminal with powerTouch
  • 22 tool change spots
  • plate changing unit going along in x-direction: 8-times or 14-times
  • lateral linear changing unit with tool delivery spot: 8-times (3-/4-axis) and 7-times with a spot for saws with up to Ø 350mm (5-axis)
  • Drilling technology
  • Spindle locking
  • Double-acting cylinder with pneumatic feed and reciprocrating grates
  • Huge pinole diamter
  • Distance from drilling peaks for storage short and constant
  • Standing sleeve
  • Quick changing system
  • Separate axial storage with single-circuit vacuum system
  • Measure belt
  • Electronical stop position
  • Connections for templates and clamping MultiClamp- clampelements (optional for pneumatic elements)
  • Table length M with 3100mm: 12 vacuum block suction, 6 vacuum narrow suction
  • Table length L with 4200mm: 16 vacuum block suction, 8 vacuum narrow suction
  • Suction storage spot
  • Workpiece insertion aid with 2 pneumatic cylinders
  • Stop system with 16 bolts: 6 in the back, 6 in the front, each two on the sides
  • Linear guiding system
  • Two synchronic servo drives in x-direction
  • Scanner for control functions left and right from the stop profile
  • ecoPlus – Technologie
  • woodWOP

Optional Additional equipment

  • Units
  • Air-cooled milling spindle with 10 kW (optional 13,2 kW)
  • C-axis for units with three point pneumatic
  • Liquid-cooled DRIVE5CS 5-axis-head with 10kW (optional 12kW)
  • for console table
  • LED positioning system
  • Laser positining aid
  • Stops at top layer protrusion
  • Multi clamping system
  • PowerClamp
  • Chip transport belt
  • Clamping system
  • Disturbence-free power supply
  • Klimatised control panel
  • "Starter KIT" tool case for respective edition
  • Scanner for control functions on portal housing
  • Laser scanner

3-/4-axis machine

  • Drilling gear
  • V12/H6 with 18 drilling spindles: 12 vertical, 4 horizontal in X and 2 horizontal in Y; groove saws Ø 100mm
  • V17/H10 with 27 drilling spindles: 17 vertical, 6 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
  • V21/H12 with 33 drilling spindle: 21 vertical, 8 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
  • Unit for 4-axis
  • High Performance: slicing; sawing; drilling/sawing/milling (2 spindles); lock case (2 spindles); drilling/saws 0°-90° pivotable
  • drilling/sawing/milling (2 spindles)
  • drilling/milling (4 Spindles)
  • Lock case (2 Spindeln)
  • FLEX5 drilling/sawing/milling
  • drilling/milling 0°-90° pivotable
  • drilling/milling 0°-90° pivotable elbowed
  • Cutting unit

5-axis machine

  • Drilling gear
  • V12/H6 with 18 drilling spindles: 12 vertical, 4 horizontal in X und 2 horizontal in Y; groove saws Ø 125mm (0°/ 90°)
  • V21/H10 with 31 drilling spindles: 21 vertical, 6 horizontal in X und 4 horizontal in Y; groove saws Ø 125mm (0°/ 90°)
HOMAG CENTATEQ P-110

WOOD TEC VALUE

Zjistěte nyní tržní hodnotu vašeho stroje HOMAG CENTATEQ P-110 pomocí WOOD TEC VALUE. Zdarma, rychle a nezávazně!

Oceňování strojů

Obrázky

8fach_Werkezugwechsler
HOMAG, 2018
14fach_Werkezugwechsler
HOMAG, 2018
bohrgetriebe_v12_h6
HOMAG, 2018
bohrgetriebe_v17_h10
HOMAG, 2018
drive5cs
HOMAG, 2018
bohrgetriebe_v21_h12
HOMAG, 2018

Dokumenty (5)

více
Méně

Typy a modelové řady HOMAG CENTATEQ P