Flush milling unit by manufacturer SCM for the flush, radius, fibre milling from above and below.
Technical data
- 2 high-frequency motors with swivelarea of 20°
- Suction hubs
- Double pneumatic remote setup
- Multifunction fibre, see multi-stage technology
- Automatic setup for following processing:
- Fibre milling with thin edges (e.g. 0,6 mm)
- Flush milling of thin edges with 2 differen redii (e.g. R1, R2)
- Flush milling of solid wood edges with 12 mm thickness
- Flush millin with radius or fibre directly ontro the panel without edes
- Different processing between top and bottom side
- Correction via 4 NC-axis