HOMAG HL 84

Kapovací pila
Záznam uvidíte za

HL 84 is the type designation of a cross-cut aggregate on edge banding machines, made by HOMAG, Germany.

Technical features

  • Draw cut of overhanging front and rear edges
  • Upright chop stop, for sensitive workpieces
  • 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm, manual tilt for chamfering
  • 2 HM sawblades, D = 120 mm
  • Processing is not possible on overhanging workpiece coatings

Optional equipment

  • Pneumatic motor tilt at the press of a panel button
  • Pneumatic motor adjustment for flush cut or protrusion cut

Obrázky

Kappsägeaggregat HL 84 Motor
HOMAG, 2009
Kappaggregat HL84
HOMAG

Agregáty

Kapovací pila
zásobník na hrany