Special attribute: Beamsaw with tiltable sawing aggregate.
- The model S 45 has been developed by the company PANHANS and constructed between 2001 and at the end of 2010.
- Between November 2010 and December 2012 the production takes place through the Austrian company AWB.
- After that the company SCHELLING took over the (SCHELLING S 45) production.
When it was launched in 2001 the saw carriage's feedrate was only up to zu 40m/min.
2009 | The S45 is offered with the additional designation "Speed"; among others the saw carriage is now able to move with speeds up to 100m/min. The saw blade can be inclined up to 45,5 °. |
2012 | version "Power Speed" was launched with the following technical characteristics that differ from the version "Speed": |
- Cutting length:
- Power Speed: 3200, 4200, 5800 mm
- Speed: 3200, 4200 mm
- Cutting width:
- Power Speed: 3200, 4200, 5800 mm
- Speed: 3200, 4200 mm
- Swivel range: 0° up to 46°
- Blade height above the machine table (saw blade projection):
- Power Speed : 97 mm
- Speed : 72 mm
- Diameter main saw blade/ power main saw motor:
- Power Speed : 400 mm/ 18,5 kW (25 HP)
- Speed : 350 mm/ 14 kW (19 HP)
- Diameter scoring sawblade: 180 mm/ power scoring saw motor 1,5 kW (2 HP)
- Saw feed speed forward/back: 0 - 100 m/min/ 100 m/min
- Width stop forward/back: 25/ max. 120 m/min
- Lateral pressure device: 50 up to 1150 mm
- Air cushion table: 3 pieces 1800 x 600 mm
Since it was launched the machine also got the additional designation "all in one". The technology of a panel saw with inclinable saw blade is especially used for low volume productions in the field of interior construction or for splitting of large-sized plates.
The production of the 'PANHANS S 45' was stopped in the end of 2012. The Austrian machine manufacturer Schelling continued production under the model designation s 45.