ISO 30ISO30 is a standard for the design of a tool interface with steep-angle taper and holding bolts for tool machines, such as CNC machining centers. FeaturesThe steep-angle taper shank has no self-locking and thus, provides the most important requirement for an automatic tool change. Furthermore, this is allowed because of the bolt located on its top. The steep-angle taper according to standard ISO30 has a relatively compact design and therefore, can often be found in smaller and lighter CNC-machining centres. Because of the relatively small contact area and the resulting lower clamping forces, it is only of limited suitability for heavy milling; this is where ISO40 is mostly used. However, for processing at high speeds it is more suitable, due to its lower mass. Since the mid-2000s, the steep-angle taper is hardly used for new machines, because it was replaced by the hollow shaft taper (HSK-F63). A special form of the ISO30 steep-angle taper is found in the circular toothing developed by SCM/Morbidelli which shall guarantee an additional anti-distortion security. Alternative terms
|
914
641
438
187
183
139
201
328
206
153
128
61
141
19
28
98
168