Series of heavy wide belt sanders from the manufacturer Costa Levigatrici, designed primarily for fine sanding.
Product summary
Until about 2000
S | Version with wrap-around sound insulation and double doors |
SA | Machine for the final sanding of white wood and painted surfaces, sanding belt length 2.620 mm |
SP | Simplified version of the S (machine without front and rear sound insulation) |
From about 2000
S4 | Sanding belt length 4.600 mm, optimized for short sanding processes, used in high-speed lines |
SA | Machine for the final sanding of white wood and painted surfaces, sanding belt length 2.620 mm |
SN | Sanding belt length 3.250 / 2.620 mm, modular structure with the aim of combining all aggregates necessary for fine sanding in one machine |
SH | Simplified version of the SN (some S-standards are optional here, machine without front and rear sound insulation) |
Standard equipment
- Segmented floating table
- Fixed table height (except type SH)
- Vacuum Table
- All-acoustic insulation (except type SH)
- Double machine doors (1. sound insulation, 2. security grille) (except type SH)
- Contactor control
Special equipment
Available aggregates
Longitudinal and cross-sanding brushing units
Cleaning devices
- S 180 cleaning brush made of nylon or plant fibers, brush diameter 180 mm
- S 250 and S 180, however, have a brush diameter of 250 mm
- SR - SRO rotating workpiece Blow-off device
- SJ blowing ionizing device
- SJ 1, SJ 2 single and double ionizing rods
- SL conveyor belt Blow-off device