SELCO Twin PusherAdditional independent grippers move programme-controlled parallel to the pusher´s movement. This allows different cutting and working cycles at the same time (rip and cross cuts or cross cutting and feed by use of a lifting table). This system was introduced for models EB 108/120 (among others) at the fair "Holz Handwerk" in Germany in 2006. According to the manufacturer it is able to achieve an increase of production of up to 30%. (Brochure: EBTR 108 TWIN PUSHER. In 2010 the manfacturer introduced a development of the Twin Pusher: the models of the WN 6 and WN 7 series. Technical features of the further development 2010A separately movable additional pusher mounted on the guide beam of the rear support table, which also moves laterally to position, has been combined with the traditional main pusher. The additional pusher can be used together with the main pusher, but is independent at the same time. It can be automatically positioned in two different lateral positions; with or without the liftable, independent grippers of the main pusher, depending on the cutting plan and size of the strips. This allows the simultaneous execution of several cutting cycles (longitudinal and cross cuts, panel infeed, rotation, strip ejection) according to the cutting plan. Differences between the series
Further development in 2012 - Multi Pusher 2.4
For further information see: separate programmable stop | SELCO Twin Pusher
|
914
641
438
187
183
139
201
328
206
153
128
61
141
19
28
98
168