Tracing deviceDevice of double end tenoners to transfer free outlines on a workpiece with a rectangular initial shape. Mechanical pneumatic programmatorConsisting of removable disks, which are directly connected to the gearing. 2 cams on each disc can be attached, one cam for start and end. The discs are sampled by the limit after the cams. On actuation of the limit switch by the cam, the copy routing aggregat goes pneumatically in or out of the workpiece. Simple contours can thus be transferred to the workpiece. Alternative terms
Electronically controlledThe future shape of the workpiece is programmed on a PC and transferred to the workpiece using CN- controlled milling aggregate . Constructive conditionsThe basic requirement is that the milling aggregate can set-in and out in the workpiece (movable at right angles to the feed direction in horizontal plane). The set-in and out is executed by a servo motor, which receives the angular momentum from the CN-control. If the contour is to be continued on the lateral side of the workpiece a second servo axis (CNC-axis) is required, parallel to the feed direction. With their help, the milling aggregate precede the workpiece. Alternative terms
|
895
624
437
186
179
134
202
321
198
151
125
63
140
15
29
91
131