BRANDT QUICKMELT QA 45

Glue system

Glue application unit in edgebanding machines of the manufacturer Brandt for the processing of hot-melt adhesives based on EVA or PU.

The QA 45 is responsible for heating pre-melted glue up to its processing temperature and for applying it to the workpiece edge with a glue roller. The melting of the solid glue is caused by the premelting unit (see technical term granulate tank for premelting). This premelting unit is available in various designs for the QA 45.

EVA premelting unit

  • For the processing of EVA glue
  • Filling volume: 4 l hot-melt adhesive granulate
  • Melting capacity: up to 8 kg/h

Two EVA premelting units

Users with a very wide range of orders, which ever again use other colors are types of adhesives, can fill the different granulate tanks for premelting with different glues and insert them when needed. The premelting units can be moved on a traversing device, making quick changes possible.

PU premelting unit

  • For the melting of 2-kg cartridges made of PU glue
  • Melting capacity: 6 kg/h The PU premelting unit is hermetically sealed and allows storage of the cartridge for up to 72 hours.

Manual filling

  • Application unit with an exchange unit for the manual filling with glue granulate or glue in cartridges. Thus, quick changes between different hot-melt adhesives or colors are possible.

Characteristics of the QA 45

  • Heating time: 10 min
  • The special non-stick coating allows for the processing of all common adhesive types
  • All functions are completely controlled by the machine control Brandt PC 20
  • Dosage of the adhesive application amount
  • Display of maintenance intervals
  • Change of the glue application in feed direction, up-cut
  • Cleaning mechanism: The operator starts the cleaning mechanism with the control. The control selects the parameters according to the used type of adhesive. By instructions on the screen, the operator is guided through the process. Excess glue is automatically retrieved from the application unit and collected in a reservoir tank. The new glue is supplied by the pre-melt unit and the system is ready for the next task.

Images

QUICKMELT QA45 | Top view when new
BRANDT, 2021
QUICKMELT QA45 | EVA Adhesive Application Unit for Premelter Systems
BRANDT, 2021
QUICKMELT QA45 | View from the unit side
BRANDT, 2021
QUICKMELT QA45 | View from the workpiece infeed side in new condition
BRANDT, 2021
QUICKMELT QA45 | View from the workpiece side in new condition
BRANDT, 2021
QUICKMELT QA45 | Electrotechnical connections
BRANDT, 2021
QUICKMELT QA45 | Axis motor for accurate glue roll infeed
BRANDT, 2021
QUICKMELT QA45 | View of glue roller in new condition
BRANDT, 2021
Gluing part QA 45
BRANDT, 2011
QA45 installed in machine (Höchsmann)
BRANDT, 2014
QA45 with pre-melting tank (Höchsmann)
BRANDT, 2014

Product brochures and leaflets (1)

more
less

Aggregates