DMC ROTOSAND

Series of moulding sanding machines built by the Italian manufacturer DMC

The general construction is nearly the same as of a wide belt sander. But instead of an aggregate with sanding belt it is fitted with special brushing units. Each unit consists of four rotating sanding brushes which are arranged as cross. The unit for itself rotates around the intersection of this cross. The advantage of this double rotating system consists in higher surface quality of workpieces with different fibre directions. This technical principle is also used in denibbing sanders of other manufacturers.

Type survey

Rotosand 110

  • Sanding width 1.100 mm
  • Setting of workpiece thickness by lifting/lowering the working table
  • Angle of sanding brush(es) is fix
  • Feedrate continuously variable up to 16 m/min

Rotosand 130

  • Sanding width 1.300 mm
  • Setting of workpiece thickness by lifting/lowering the machine's upper part; Because of the constant table height this machine is suitable for sanding lines.
  • Angle of sanding brush(es) adjustable
  • Feedrate continuously variable up to 16 m/min

Further development

Images

Rotosand 110
DMC
Rotosand 130
DMC

Type

Moulding sanding machine