FESTO MDA

Range of top class double end tenoners from the German manufacturer Festo

  • Production time frame: 1970s

The workpiece feed takes place via underlying feeding chains with dogs and upper pressure element with rotating belt. The upper pressure element can be optionally equipped with a powered belt. A snychromesh ensures that the workpieces are fastened to the dogs of the bottom chain through the top chain.

Type MDA 0015 is equipped with a 40 kW frequency converter.

Application

Working processes

  • Right-angled cross cutting and format cutting
  • Milling tongue and groove, slot and tenon or fingerjointing profile, folding
  • Milling continuous grooves (e.g. in furniture rear walls)

Serial production of...

  • Furniture pieces, furniture and interior production
  • Upholstery frames
  • Windows and doors
  • Wall and ceiling cladding parts
  • Parquet

Aggregates

The list is for right and left machine sides, separated by the forward slash. The information before the forward slash is applicable to the right machine side.

MDA 611/610 Chipping aggregate, 4.4 / 6.3 kW at 3,000 / 6,000 rpm, tilting from 0 to 45°
MDA 616/617 Scoring aggregate, 1.5 kW at 6,000 rpm and 100 Hz, as unit with the chipping aggregate tilting from 0 to 45°
MDA 601/602 Milling aggregate, 7.4 kW at 4,500 / 7,000 rpm, tilting from 0 to 90°
MDZ 613/614 Milling aggregate, 4.4 / 6.3 kW at 3,000 / 6,000 rpm, tilting by 135°

Technical data

Working width max.: 3,000 mm
Working width min.: 170 mm
Workpiece thickness max.: 140 mm
Feed rate: steplessly controlled from 4.8 to 31 m/min

Product brochures and leaflets (1)

more
less