BIESSE MILLENNIUMShort DescriptionCNC machining center of the manufacturor Biesse, exclusively meant for edgebanding. It was produced from 1998 up to the mid-2000s. ConstructionThe Biesse Millenium is a portal machine with a vertical portal. The X-axis is along the portal. At the aggregates support the Y-axis as well as the Z-axis are located. The machine has got not machine table. Instead, in a central position underneath the portal, the edgebanding unit with glue roller, edge feed, edge magazine, trimming saw as well as flush cutter are located. The aggregates support only has a holder for multiple suction and chuck devices. The machine can process workpieces from 400 x 400 m minimum up to 2.300 x 1.200 mm maximum. Possible workpiece thicknesses range from 18 - 50 mm. The lipping thickness may range betwenn 0.8 - 3 mm. However, there are versions that can handle lipping with a thickness between 0.3 - 1 mm. Mode of operationThe ready-formatted plates are transferred into the machine by a feeding table, a conveyor belt or a movable feeding table, and the suction and chuck device is automatically tigthened. With the movement of axes the plate is moved towards the fixed gluing aggregate and then the edgebander is pressed to the workpiece with the help of pressure rollers. The machine has got a trimming saw to cut of surplus edgebands, as well as a milling unit to chamfer or to mill radiuses. All units are fixedly mounted in the middle of the machine, and the processing is done by moving the plate. After finishing the work cycle, the plate is stored on a feed out conveyor. |
WOOD TEC VALUE
Valuate your used BIESSE MILLENNIUM now for free and calculate the current market price. Quick, simple and independent! Machine valuation |
914
641
438
187
183
139
201
328
206
153
128
61
141
19
28
98
168