BARBARIC TSRET 02
Production:
approx. 2009
approx. 2015

WOOD TEC VALUE

Valuate your used BARBARIC TSRET 02 now for free and calculate the current market price. Quick, simple and independent!

Value machine

BARBARIC TSRET 02

The return system TSRET02 by Barbaric is a workpiece return conveyor for edgebanders.

It is the extended version of the TSRET construction series, accomplishing the following tasks:

  • destacking the workpiece
  • replacing the workpiece after the edgebander
  • turning the workpiece, if needed, 90° or 180°
  • replacing the workpiece to the height level of the edgebander
  • removing and restacking the finished workpieces

Mode of operation

The vacuum lifter is at the end of the edgebander. It destacks the workpieces and conveys them via feeding device to the operator. After passing the edgebander, the workpiece is moved on a belt conveyor. The replacement is carried out by the vacuum lifter, movable in transverse direction. The lifter turns the workpiece if needed at 90° or 180° and places it on a belt conveyor. This conveyor is slightly lower than the workpiece infeed of the edgebander for preventing the collision of large workpieces. The workpiece is conveyed to a roller table, slightly inclined to the infeed. The workpiece comes to a halt at the stop of the roller table end. Several stacks can be built.

Technical data

carrying capacity max. : 60 kg
panel size max. : 3,000 x 1,500 mm
cycle time : max. 11 workpieces/min

Return system type overview

TSRET04 : replace and refeed workpiece
TSRET03 : replace, turn and refeed workpiece
TSRET02 : place, replace, turn, refeed and stack workpiece

Images

Returnsystem TSRET02 (Barbaric; 2015)
BARBARIC
TSRET02 - Luftkissentisch
BARBARIC, 2015
TSRET02 - Bedienfeld
BARBARIC, 2015

Documents (1)

more
less

Types of the series BARBARIC TSRET

Workpiece return conveyor