Firmly installed drilling unit on CNC-machining centres of the manufacturer Format 4.

The drilling unit DH 20 consists of a basic body which can be equipped with four different configurations:

configuration:

• 7 vertical drilling spindles as hole ranges in x-direction,
• 5 vertical drilling spindles as hole ranges in y-direction,
• 4 horizontal drilling spindles in x-direction,
• 4 horizontal drilling spindles in y-direction,
• 1 groove saw in X-direction

6H 1S:

Standard equipment on the machining centre of the Profit series:

• 9 vertical drilling spindles as hole ranges in x-direction,
• 5 vertical drilling spindles as hole ranges in y-direction,
• 4 horizontal drilling spindles in x-direction,
• 2 horizontal drilling spindles in y-direction,
• 1 groove saw in X-direction

6H 2S:

• 9 vertical drilling spindles as hole ranges in x-direction,
• 5 vertical drilling spindles as hole ranges in y-direction,
• 4 horizontal drilling spindles in x-direction,
• 2 horizontal drilling spindles in y-direction,
• 1 groove saw in X-direction
• 1 groove saw in Y-direction

8H 1S:

• 7 vertical drilling spindles as hole ranges in x-direction,
• 5 vertical drilling spindles as hole ranges in y-direction,
• 4 horizontal drilling spindles in x-direction,
• 4 horizontal drilling spindles in y-direction,
• 1 groove saw in X-direction

8H 2S:

• 7 vertical drilling spindles as hole ranges in x-direction,
• 5 vertical drilling spindles as hole ranges in y-direction,
• 4 horizontal drilling spindles in x-direction,
• 4 horizontal drilling spindles in y-direction,
• 1 groove saw in X-direction
• 1 groove saw in Y-Richtung