Firmly installed drilling unit on CNC-machining centres by manufacturer Format 4.

The drilling unit DH16 4H 2S is a variation of configuration of the DH-series 20 from drilling units and optional equipment variations on the machining centres.

Configuration:

• 12 vertical drilling spindles, from which:
• 8 spindles as 32mm-hole lines go in X-direction
• 5 spindles as 32mm-hole lines go in Y-direction (1 spindle can be used in both directions)
• 2 horizontal drilling spindles in +/- X-direction,
• 2 horizontal drilling spindles in +/- Y-direction
• 2 groove saws, each in X and Y direction