Compact 5-axis-CNC-machining centre as 3-, 4- or 5-axis machine for the application in smaller artisanry businesses, the n for the application in smaller handicraft businesses.
Technical data (2018)
- Workpiece length X with single processing: 3 100mm (M) or 4 200mm (L)
- Workpiecelength X with pendulum processing: 1 025mm (M) or 1 575mm (L)
- Workpiece length X with single processing and tool diameter 25mm:
3 300mm (M) or 4 400mm (L)
- Workpiece width with tool diameter 25mm Y: 1 550mm and 1 415 (5-axis)
- Workpiece width Y: 1 440mm and 1 210 (5-axis)
- Workpiece thickness: 260mm
Equipment of standard version (2018)
- Control panel integrated within the CNC
- Proximity scanner (can halt automatically)
- Bumper security technology
- mobile control terminal with powerTouch
- 22 tool change spots
- plate changing unit going along in x-direction: 8-times or 14-times
- lateral linear changing unit with tool delivery spot: 8-times (3-/4-axis) and 7-times with a spot for saws with up to Ø 350mm (5-axis)
- Drilling technology
- Spindle locking
- Double-acting cylinder with pneumatic feed and reciprocrating grates
- Huge pinole diamter
- Distance from drilling peaks for storage short and constant
- Standing sleeve
- Quick changing system
- Separate axial storage with single-circuit vacuum system
- Measure belt
- Electronical stop position
- Connections for templates and clamping MultiClamp- clampelements (optional for pneumatic elements)
- Table length M with 3100mm: 12 vacuum block suction, 6 vacuum narrow suction
- Table length L with 4200mm: 16 vacuum block suction, 8 vacuum narrow suction
- Suction storage spot
- Workpiece insertion aid with 2 pneumatic cylinders
- Stop system with 16 bolts: 6 in the back, 6 in the front, each two on the sides
- Linear guiding system
- Two synchronic servo drives in x-direction
- Scanner for control functions left and right from the stop profile
- ecoPlus – Technologie
- woodWOP
Optional Additional equipment
- Units
- Air-cooled milling spindle with 10 kW (optional 13,2 kW)
- C-axis for units with three point pneumatic
- Liquid-cooled DRIVE5CS 5-axis-head with 10kW (optional 12kW)
- for console table
- LED positioning system
- Laser positining aid
- Stops at top layer protrusion
- Multi clamping system
- PowerClamp
- Chip transport belt
- Clamping system
- Disturbence-free power supply
- Klimatised control panel
- "Starter KIT" tool case for respective edition
- Scanner for control functions on portal housing
- Laser scanner
3-/4-axis machine
- Drilling gear
- V12/H6 with 18 drilling spindles: 12 vertical, 4 horizontal in X and 2 horizontal in Y; groove saws Ø 100mm
- V17/H10 with 27 drilling spindles: 17 vertical, 6 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
- V21/H12 with 33 drilling spindle: 21 vertical, 8 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
- Unit for 4-axis
- High Performance: slicing; sawing; drilling/sawing/milling (2 spindles); lock case (2 spindles); drilling/saws 0°-90° pivotable
- drilling/sawing/milling (2 spindles)
- drilling/milling (4 Spindles)
- Lock case (2 Spindeln)
- FLEX5 drilling/sawing/milling
- drilling/milling 0°-90° pivotable
- drilling/milling 0°-90° pivotable elbowed
- Cutting unit
5-axis machine
- Drilling gear
- V12/H6 with 18 drilling spindles: 12 vertical, 4 horizontal in X und 2 horizontal in Y; groove saws Ø 125mm (0°/ 90°)
- V21/H10 with 31 drilling spindles: 21 vertical, 6 horizontal in X und 4 horizontal in Y; groove saws Ø 125mm (0°/ 90°)