HOMAG CENTATEQ P-310

CNC-machining centre for drilling, saws, milling and optionally also edgebanding with the Centateq E 310

saveScan area scanner
Proximity scanner
Saw chip transport belt
Control panel
Scanner for control on the machine
Automatic central lubrication of the main axis
Closed guide carriage
Rack pinion drive system in x and y
Energy chain (covering cable and hoses)
Two separate z-axis for drilling heads and main spindles
4- or 5-axis-milling spindles
Liquid cooling
Spindle sensor
DRIVE5C/+ (5-axis spindle)
Pneumatic interface
Console table
> K-table
Positioning aid with LED or Laser and measure band
powerClamp, Multi clamp, Matrix-adapter panel
Magnet valve
Double circuit vacuum system
Chip transport
> A-table
movePart
Clamping device
Drilling technology
Measuring scanner
Additional milling spindle
V12/H6 with 18 drilling spindles: 12 vertical, 4 horizontal in X and 2 horizontal in Y; groove saw Ø 125mm
V21/H10 with 31 drilling spindle: 21 vertical, 6 horizontal in X and 4 horizontal in Y; groove saw Ø 125mm (0°/ 90°)
Spindle locking
Double-acting cylinder with pneumatic feed and reciprocating grate
Big pinole diameter
Distance from the drill bit to the storage short and constant
Standing sleeve
Quick-changing system
Separate Axial storage
Changing system
Going along in x-direction
on Machine bed with transfer point
Linear changer 8-times
Place changer 10-times, 32-times, 14-times
Unit
Edge release
Underground miller
Drilling / milling
FLEX5 unit (4-axis spindle)
Lock case miller
Belt sanding
Exenter sanding
Software
woodWOP
powerTouch PC87
collisionControl