Increase in output amount up to 40% with HOMAG SAWTEQ beamsaws through simultaneous dividing of different panel formats.

Core piece: Mounted on a guide beam of the rear supporting table, separately movable and thus separately operating collet allows cross-cutting of already cut stripes at the same time as longitudinal cutting.

• collets on the main pusher that move up out of the working area when needed
• speed package for up to 150 m/min saw carriage speed
• time-optimised machine cycles through to a special measuring system in two collets for pre-positioning the pressure beam
• distributed air cushion tabke
• for stripes with the same cross-cutting, the Power Concept can be firmly connected to the main programme pusher by means of an interlock

Features of the HOMAG Power Concept classic (2021)

• up to 30 % more power (depending on cutting plan)
• can be used for the models HOMAG SAWTEQ B-130 and HOMAG SAWTEQ B-200 (in each case without lift table)
• retrofittable for machines produced after July 2021
• optionally with HOMAG intelliGuide classic

Features of the HOMAG Power Concept (2018)

Professional

• A movable and thus separately operating collet allows cross-cutting of already cut stripes at the same time as lengthwise cutting.
• collets on the programmable stop, which move up out of the working range if required
• with co-ordinated stripe sorting

Practive (for saws without lift table)

• cheaper option
• for machines with feeding from the front side
• without integrated pre-stacking table