The bench machine TMS 1810 from SCHUGOMA for edgebanding with Zero joint is the supplement to edgebanders which are not a zero joint unit but a Premilling unit have.
Mode of operation
The edge Processing is carried out in three steps:
- Step: The workpiece passes through on the Edgebander the premilling unit.
- Step: After the workpiece has through-feed the machine, it is placed on the upstream SCHUGOMA TMS 1810 where the edgeband is "glued" through the EdgeKing unit and roughly cut to length.
- Step: A connecting roller feed feeds the workpiece to the edgebander which finishes the edge.
TMS 1810 as stationary machine
SCHUGOMA offers additional equipment for the TMS which allows the processing free form parts in manual mode. By means of a swivel device, edge inclined up to 45° can be processed.
| Edge height max.|| : 65 mm|
|Edge thickness max.||: 3 mm|