PP edge materialPolypropylene (PP) edges are used in furniture construction as an alternative to PVC and ABS edges. As the manufacturing process is somewhat more difficult than that of ABS edgebanding, PP edgeband is preferably produced in large batch sizes. This explains why PP edge in the furniture industry are primarily processed by industrial companies. To achieve better adhesion of the hotmelt the back is coated with an adhesion promoter (primer). PP edgebands are also available for the zero-joint gluing process. Due to the characteristics of PP, edge made of this material can be found on kitchens, offices and bathroom furniture as well as on trade fairs and shop fittings and interior construction elements. Processing informationPP edges can be processed with all common automatic edgebanders and CNC-machining centres and suitable manual edge banding machines. Cross cut sawThe trimming saw should be assembled with saw blades with one-sided sharp toothing. The use of alternately toothed saw blades can lead to chipping, all on thin edge. Moulding aggregatesDyed polypropylene reacts to impacts with discoloration (Stress whitening). This can be minimized through using sharp milling tool with high concentricity in the edge milling units. The tool diameter should be approx. 70 mm, the spindle speed should be 12,000 to 18,000 rpm. ScraperThe depth of cut the Scraper should not exceed 0.15 mm, otherwise the discoloration described above will occur. Buffing unitThe action of the buffing wheels can remove stress whitening and adhesive residues if the rotation speed is approximately 1,400 rpm/min and the contact pressure is not too high. ExtractionSince the chips of polypropylene become statically charged during processing, they "stick" to the workpiece and machining units, especially to their tracer discs. An extraction capacity of 2.5 m³/s and the use of antistatic sprays ensure trouble-free workpiece processing. |
896
622
438
188
179
133
203
323
198
149
125
63
139
15
29
93
124