HL 84 is the type designation of a cross-cut aggregate on edge banding machines, made by HOMAG, Germany.
- Draw cut of overhanging front and rear edges
- Upright chop stop, for sensitive workpieces
- 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm, manual tilt for chamfering
- 2 HM sawblades, D = 120 mm
- Processing is not possible on overhanging workpiece coatings
- Pneumatic motor tilt at the press of a panel button
- Pneumatic motor adjustment for flush cut or protrusion cut