Heizomat GmbH
German company that develops and manufactures power systems.
Vendor History
| 1982 | Founded by Robert Bloos. |
| 1993 | Acquirement of the plant oil engine manufacturing and development company Elsbett. |
| 2005 | Acquisition of the former Hahnenkammkaserne in Heidenheim. There are 370 ha production space. |
| 2006 | Construction of a new production hall (opening to the 25th anniversary in 2007) |
History (2007)
| 1982 | The first HEIZOMAT furnace with a chip container for one-day operation. |
| 1983 | Developing a bunker discharging system with joint-rod expander-discharger. It is the basis to link any store room to use them as a fuel tank. |
| 1984 | The first cell wheel sluice is constructed. With this construction a reliable protection against backward propagation of flames and avoidance against secondary air flow through the convey auger is possible. |
| 1986 | The first HEIZOMAT furnace HSK is produced, horizontal big-size heat exchangers that are easy to clean by hand. |
| 1987 | The HSK-A furnace is equipped with an automatic ash discharging system, which transports the ash to a container. |
| 1989 | The first wood chipper HEIZOHACK HM-4 is constructed. |
| 1990 | The first big sized HSK-A special furnaces 300 / 400 / 500 / 650 / 850 kW are delivered. |
| 1992 | The chipper-type HEIZOHACK HM 5-14 is constructed. It can chop trunks with a diameter up to 40cm. Also, the crane-charged chipper HM 10-12-14 K is developed this year. |
| 1993 | Development and production of a bunker stir mechanism gear, which transmits the power by gearwheel, and a labyrinth sealing system to avoid the penetration of moisture and dirt. |
| 1994 | The plant oil expeller HEIZOPRESS is constructed, a machine for production of plant oil (for human consumption, but also as hydraulic oil and plant oil fuel for engines) |
| 1996 | Construction of the first boiler HSK-RA, which cleans the heat exchanger surfaces automatically and discharges the ash. |
| 1998 | Change of control system to microchip technology. |
| 2000 | The first boiler model RHK-AK was installed in factory in Maicha. The boiler system is the basis for the combustion of wood chips, which are contaminated with foreign objects such as nails, stones, etc. With the new cyclone combustion chamber and the chain deashing the way for the utilization of various fuels such as bark, straw, pellets, seeds, bowls, biopackaging etc., so biomass, is created. |
| 2002 | The first HEIZOSCHNEID is built. This device, which can be connected to tractors, loaders, excavators etc., can be used to harvest shrubs, bushes and trees mechanically. With the stable structure it is possible to hold the bole with the gripper, to cut with scissors and remove it perpendicularly. |
| 2003 | The quick positioning of the wood chips in high bearing chambers is possible with the HEIZOSCHNECK and HEIZOTRANS. The auger feeds the robust blower load-dependent at maximum. |
| 2004 | The first wood-collecting-gripper and tongs HEIZOGREIF is built. With this machine it is easy to pick up bushes, shrubberies and boles from the ground and bring them to the chipping place. |
| 2005 | The first HEIZOHACK HM 14-800 KL is constructed. The chipper is mounted on a truck with 320 HP. The drive machnism is taken over by the truck engine and the crane can be operated easily from the seat in the air-conditioned cab. |
History
| 2006 | New construction of a production hall (inauguration for the 25-year company anniversary 2007) |
| 2005 | Purchase of the former cockscomb barrack in Heidenheim. 370 hectare production area was available. |
| 1993 | Acquisition of the plant oil motor- production and development business Elsbett. |
| 1982 | Foundation by Robert Bloos. |
show full history
