The model series Project 320 was one of the longest produced and most successful series from Masterwood. One reason for this success, among others, has been the flexible concept with a variety of possible configurations and model versions in one price range, which especially targeted craft and smaller industries.

In the mid-1990s, the model replaced the predecessor Project 319. Initially, it rarely differed in optics from its predecessor.

In 1997, the design has been slightly revised. Instead of green/yellow, the machine was now blue/gray and had a bright red bumper.

A complete revision followed in mid-2000, when Masterwood changed all their model series to a completely new design and introduced controls of a new generation. The Project 320 was extended by different model versions.

Already in the 1990s, a model version with special equipment for door manufacturing was presented, with the name 'Project Doors'.

The machine was built until about 2005.

Basic equipment at launch

• Pod and rail table
• Working range: 3.200 x 900 x 80 mm
• Router head 6.6 kW with ISO30 tool holder
• Drilling block with vertical drills , 4 drills in plus/minus X and 2 drills in plus/minus Y as well as a groove saw
• 4-fold tool changer

Equipment of the last version

• Equipment either with pod and rail table or matrix table as well as with a special table for door construction for the model 'Door'
• Except for the model 'Door', all model series were available in an extended 'L' version.
• 4 aggregates supports (Standard, R, K, Doors) were available, which again could be combined with different working tables.
• With standard tools, workpieces with a thickness of up to 110 mm could be processed.
• Table sizes:
• Standard/ Model R: 3.000 x 1.300 mm
• Model 'K': 3.100 x 1.200 mm
• Model 'Doors': 2.410 x 1.200 mm
• Model L/ RL/ KL: 4.550 x 1.300 mm
• Aggregates support:
• Standard: 3 mounting slots for router heads, additional sawing aggregate, or lock case milling aggregate, drilling block with 20 vertical and 6 horizontal drills as well as up to 2 groove saws
• Model 'K': 2 mounting slots for router heads, additional sawing aggregate, or lock case milling aggregate, drilling block with 11 vertical and 6 horizontal drills as well as up to 2 groove saws
• Model 'R': 3 mounting slots for router heads, additional sawing aggregate, or lock case milling aggregate, no drilling block
• Options:
• Either ISO30 or HSK-F63 tool clamping system
• C-axis
• Depending on the model, router heads with higher powers of up to 11 kW
• Different versions of lock case milling aggregates
• Depending on the model, disc tool changer traveling in X and Y with 8 positions
• Depending on the model, disc tool changer traveling in X with 8 or 14 positions
• Only model K: pickup tool changer traveling in X with 3 or 4 positions
• All models: fixed pickup tool changer with 5 or 7 positions