CNC-cut-off-saw with slider from Paul

• Market launch: 2006
• With Paul´s typical backwards inclined table; the material slides against the lengthwise fence and as a result of this in many cases it is not necessary to use additional side-pressure devices for positioning
• Workpiece/package thickness: max. 200mm
• Saw blade changeable from the front (novelty in the field of trimming saws)
• Touch screen control panel
• Pusher positioning: plus/ minus 0.2 mm accurate

In the year 2012, PAUL reworked the series Push_Cut_CX and adapted it to the current design of cutting plants. Model designation Push_Cut_CX II.

• Options (selection):
• Detection of chalk markings
• Length sorting, destacking
• Inkjet printer
• Barcode reader

Dependent on the infeed length a distinction is made between:

• Model 203: 3300mm
• Model 205: 4800mm
• Model 206: 6300mm

These models are contructed as cutting stations:

• Model C6 with a cutting zone of 320 x 150mm/ 420 x 50mm
• Model C7 with a cutting zone of 330 x 200mm/ 440 x 100mm

Model with clamp gripper: Push_Cut_CX-Z