HOMAG FLO

Záznam uvidíte za

Production series of double end tenoners with standardised aggregate configuration (Optimat)

Machine frames of Homag´s high performance machines 'Homag FL' provide the basis of this system, the most important difference is the feeding chain. Production series 'FL' is equipped with rolling chains - production series 'FLO' is equipped with sliding chains.

Type designations

Using the example of FLO 62 M-3
FL...machine frame
O...Optimat
62...type
-3...the additional processing aggregate that was applied provided by the customer is an 'alternate milling aggregate'

Additional designations

II means secondary machine with dogs
25 or 30 describes the maximum working width
25 = 2500mm
30 = 3000mm
500 or 1000 provides information on the chain´s extension in front of the machine in millimeters so that the dogs are able to gather wider workpieces

Overview of various types

FLO 22	feedrate up to 25 m/min, workpiece thickness max. 90 mm, workpiece projection 25 up to 115 mm, number of aggregates: 2 (scoring-hogger- combination, 1 free space)
FLO 23	feedrate up to 25 m/min, workpiece thickness max. 90 mm, workpiece projection 25 up to 115 mm, number of aggregates: 3 (scoring-hogger-combination, standard milling aggregate with pneumatic operation control, 1 free space)
FLO 62	feedrate up to 40 m/min, workpiece thickness max. 90 mm, workpiece projection 25 up to 115 mm, number of aggregates: 2 (scoring-hogger-combination, 1 free space)
FLO 63	feedrate up to 40 m/min, workpiece thickness max. 90 mm, workpiece projection 25 up to 115 mm, number of aggregates: 3 (scoring-hogger-combination, standard milling aggregate with pneumatic operation control, 1 free space)