Moving gantry machine
You see the entry in
Used as term for a design of CNC-machining centres. It is a special form of portal machines. Also, the term "real moving gantry" is used to differentiate from machines driven on both sides. In moving gantries a linear axis is realized by a portal, driven on both sides, moving above a fixed table (mostly the X-axis). At the portal an aggregates support is mounted that is driven by an additional linear axis (mostly Y). In "real moving gantries" both sides of the portal are driven by synchronized motors. There are cheaper possibilities, where only one single motors drives the protal by gearboxes or belts. This may cause transmission losses. There is a special variation based on the design of a cantiliver machine. Thereby the cantilever is ride-stabilized by a support. But this is not a driving portal in the real sense. Advantages
DisadvantagesIn a real gantry machine, both sides of the portal are driven synchronized and by separate motors to achieve the best possible positioning accuracy. This is relatively complex and therefore expensive. Some manufacturers solve this in a more inexpensive way using a central drive, which is transferred to both sides of the portal. However, this includes the risk of transmission losses and inaccuracies. Alternative terms
|
874
601
428
189
183
129
199
323
178
141
120
59
119
11
35
89
73